Honda Prelude Online banner

were would I go to get cams profiled?

774 Views 2 Replies 2 Participants Last post by  Luder-xhpx
buying gude cams in the next week from a guy I know.

I want them spec'd and the profile on them check'd to make sure they are the specific street cam grind I want.

would I take them to a machine shop?
1 - 3 of 3 Posts
A speed/machine shop should be able to do it. Basiclly, a machine shop that only deals with performace applications, or a speed shop with machine shop capabilites. These are hard to find, and most will charge an arm and a leg. But there are a few good ones out there, such as "LJ's Speed and Machine" in Napa, California.

Look in your local yellow pages for refrences. Most shops that can correctly balance a rotating assembly should also be able to profile a cam correctly.

My 2 cents....

"Going faster since 1994"

"Drag racing is for those that can't steer"
thanx for the help!
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.