[J01SH]

OK I am trying to finish my NX install I need to know where EXACTLY to tap in my switches power. What fuse or wire or what. Parden my ignorance but I've never wired anything before.

I've searched but pictures would be VERY helpful

Thanks

 

[wreckdiver]

OK. I put one at www.kimarkcreations.com/prelude/powersource.jpg

Not very clear, but you'll see where to go, use a inline fuse holder from there(Walmart has good ones)

 

[J01SH]

thanks for the help...what is that exaclty going from the fuse port?

 

[wreckdiver]

A Buss fuse holder from WalMart with a insulated male crimp-on spade connector (with some of the plastic cut off), will slide right in that terminal

 

[typeshlude2001]

just tap into ur cd players power...

 

[ZMonkey11]

just tap into ur cd players power...

How are u posting?!?!? I thought u were on vacation. My bottles still empty!!!!!!!!!!!!

 

[achemze]

And that is why bottles are for babies... I'm almost absolutely positive you can tap into anything that maintains a constant 12V during normal operation (key in spot for IGN1) or and 0v during the off position (IGN0)

 

[ZMonkey11]

And that is why bottles are for babies... I'm almost absolutely positive you can tap into anything that maintains a constant 12V during normal operation (key in spot for IGN1) or and 0v during the off position (IGN0)

um...why is what the reason bottles are for babies? Cause u have to tap into a wire?