Honda Prelude Online banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,385 Posts
Discussion Starter · #1 ·
I'm replacing my cap and rotor at this moment. I got the cap off. I can get access to the screw holding the rotor. The only problem is that it won't come off!! It's stuck on damn tight! Does anyone have any tricks or suggestions to get the screw off??
 

·
Registered
Joined
·
416 Posts
<font face="Verdana, Arial" size="2">Originally posted by Tola:
I'm replacing my cap and rotor at this moment. I got the cap off. I can get access to the screw holding the rotor. The only problem is that it won't come off!! It's stuck on damn tight! Does anyone have any tricks or suggestions to get the screw off??</font>

yeah, taht screw is usually on real tight.

to get more grip and to avoid strippin the screw, cover the tip of your driver with some masking tape. this will provide you with the extra grip. and apply more pressure while turning by pushing on the end of the driver with the palm of your hands.


------------------
kimchi cures cancer
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top