Honda Prelude Online banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3,116 Posts
Discussion Starter #1
I took off the screws on each top corner (near fender well) and some bolt on the bottom. As well as the screws that hold on the "grill". What else is there? Do you have to take off the headlights to get to the plastic screws below them? It seems to still be caught around the headlight area. Thanks
 

·
Premium Member
Joined
·
1,166 Posts
I have made about 5 or 6 write ups about this before. This needs to be a FAQ. behind each set of bumper lights, there is 2 bolts. They need to be removed to pull the bumper off. Then you can seperate the cover from the bumper.
 

·
Registered
Joined
·
9,437 Posts
<font face="Verdana, Arial" size="2">Originally posted by Dr. James:
I have made about 5 or 6 write ups about this before. This needs to be a FAQ. </font>
Dr.James, if you can dig up one of those(i assume they're more detailed?), i'll archive it


------------------
<font face="Verdana, Arial" size="2">Originally posted by malken00:
I like to rub my nipples while watching the shopping channel </font>
 

·
Registered
Joined
·
3,116 Posts
Discussion Starter #6
<font face="Verdana, Arial" size="2">Originally posted by Prelude_RCR:
I see someone's getting a new front bumper?
</font>
Nah. For some reason my bumper was about .5-1" to low (small gap between bumper and hood". So I have to just raise it back up. trying to sell my car and it wouldnt look good w/ a gap there heh.
 
1 - 7 of 7 Posts
Top