Honda Prelude Online banner

1 - 5 of 5 Posts

·
Thinking about going 9PSI
Joined
·
824 Posts
Discussion Starter #1 (Edited)
I had an aftermarket alarm on my car and it was crap. So I removed it and for the most part it was pretty straight foward. But there were two connections that were unlike the others which. So after removing the alarm I have these to loose wires and I have no idea if I need to re attach them or what. My car us running fine, everything works. I don't have keyless entry so I can't test that. Here is an image of what I am talking about

http://i1284.photobucket.com/albums/a570/afrancoit/IMAG0969_zps42872eef.jpg

any help would be appreciated to identify these wires in the image about with the bluc connectors on them
 
1 - 5 of 5 Posts
Top