Honda Prelude Online banner
1 - 5 of 5 Posts

·
Registered
Joined
·
855 Posts
Discussion Starter · #1 ·
i put my back bumper on and the hole cut out for the exhuast don't match up with my exhuast. anyways what can i do. can i just unbolt the hangers of the exhuast and remount them a lil over i mean if i take the hangers off with the exhuast be able to swing he exuast over a few inches or what or is is really stiff and won't move from side to side or just hang lower. please help me.
 

·
Registered
Joined
·
130 Posts
Oh... freak I forgot to inform you Kian that your piping has to be adjusted just to go perfect with the hole. That's what my friend had to do with his HKS Super Dragger and he had a BW like yours.

------------------
-= VENGEANCE RACING =-
-=CODENAME: VERONICA=-
- 2K Gen5 H22A VTEC SS
- Spectra Blue Mica
- ViS Techno R Full Body

"Get Your Boogie On Gangsta... C-Walk Homie!"
 

·
Buttering up the muffin
Joined
·
965 Posts
You can bend the hangers holding the exhaust. Some aftermarket bumbers are just too low. I've bent one for a civic si with a tsunami back on a vice with no problems what so ever.
Jake
 

·
THE LONELY MONK
Joined
·
6,005 Posts
My friend has a BW kit and he basically got a new muffler and took it to a shop to remount.

--Sam

------------------

With Great Powers Come Great Responsibilities--Never Underestimate the Power of the VTEC
 
1 - 5 of 5 Posts
Top