Honda Prelude Online banner
1 - 1 of 1 Posts

·
Registered
Joined
·
133 Posts
Discussion Starter · #1 ·
my prelude is at the shop and i desparately need to get it finished. there are a couple of things i need to cover but i will start out with this.

the shop broke the heater core hose as they were transplanting the motor. they used a standard 5/8 hose but it is two long in it and has some really tight bends because of how it is placed, un-natural you know?

i need to order the hose to fit this car today but i have know idea what hose it is. the only thing i know is that it is the hose comming from the heater core that is the one closest to the passenger side of the car. honda wasn't sure but they 'thought' it 'might' be the return hose.

i need to know exactly wich hose this is. is there any other hose that will fit this?

the 5/8 hose that is on there now is leaking like mad around the clamp, is 5/8 to big? what size is this hose? is it the return hose?

also, would the leak in the hose cause the engine to overheat while sitting there in idle?

the fan stays on a few seconds ofter the car shuts off, does that mean the thermostat is bad?

with the placement of the thermostat in these cars is it possible for the hose to be leaking while the water pump is trying to force water through it and the thermostat be not open, or with the fact that it is leaking mean that the thermostat is fine?

thanks, please try to help!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top