Honda Prelude Online banner

offset for 3 piece racing hart c-5 wheels

911 Views 11 Replies 7 Participants Last post by  WYSIWYG
does anyone know, i plan on buying some from this guy..but wanna know this 1st
1 - 12 of 12 Posts
You need to tell us what size you getting first.
<font face="Verdana, Arial" size="2">Originally posted by svng4types:
18x8</font>
Go to http://www.dazzmotorsports.com and ask to speak with someone after getting their phone number off that site. I did this when I was rim shopping......they'll tell you right over the phone.
Also have the seller look at the backside of the rim....the offset is stamped on the inside of one of the spokes.

------------------
AOL IM: Joon525

[email protected]

[This message has been edited by Joon525 (edited March 28, 2001).]

[This message has been edited by Joon525 (edited March 28, 2001).]
See less See more
5
Good luck w/ getting a set of C5 3 pieces. They were discontinued this month (or was it last?) If you truly want them, it'll take about 2-3 months to get them.
SAM
<font face="Verdana, Arial" size="2">Originally posted by atlxchink:
Good luck w/ getting a set of C5 3 pieces. They were discontinued this month (or was it last?) If you truly want them, it'll take about 2-3 months to get them.
SAM
</font>
*Evil grin*
<font face="Verdana, Arial" size="2">Originally posted by Joon525:
*Evil grin*</font>
If only they would discontinue the Tanabe RM too

SAM
See less See more
so C5 discontiue , the price on these baby are cheaper right? also wat offset i need to run 18X8 on our luide so tat it will not rub??
No, they won't necessarily be cheaper. Dazz still wants the retail price for them b/c there hard to get. Rarer=more $
SAM
<font face="Verdana, Arial" size="2">Originally posted by atlxchink:
No, they won't necessarily be cheaper. Dazz still wants the retail price for them b/c there hard to get. Rarer=more $
SAM
</font>
*evil grin*



------------------
AOL IM: Joon525

[email protected]
See less See more
5
<font face="Verdana, Arial" size="2">Originally posted by Joon525:
*evil grin*</font>




[This message has been edited by rf7475 (edited March 28, 2001).]
See less See more
depending on the type of disk for the 18x8s...
- super low with dual 114.3 pcds, 44 and 50 offsets
- low with dual 114.3, 45 and 51
- high with single 5x114.3 fitment, 41
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top