Honda Prelude Online banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,404 Posts
Discussion Starter · #1 ·
Hey everyone. I recently ran into a problem with my PIAA 1000X Foglights. One day they stopped working so I get home, open the hood and see that what was once my fuseholder is now a ball of plastic. I replace that and still nothing. I suspect it to be the relay maybe? The guys at my local shop say that PIAA is notorious for that.

So, is there a way I can check to see if it is a relay?

Thanks in Advance.
JP
 
G

·
I've had my 1100x's for 3 years now, on 3 different cars. I have only replaced one bulb, and had to replace the relay once. What you can do, just get a voltage tester, connect the side of the relay that has the switch and the power on it, then test the output of voltage on the other side of the relay. If you get no voltage, your relay is dead.

------------------
Malken00
[email protected]
 

·
Registered
Joined
·
2,404 Posts
Discussion Starter · #3 ·
Thanks a lot Malken. Now, if it turns out to be my realy, where can I get a new one?

JP
 
1 - 3 of 3 Posts
Top