[Prelude Ed]

please explain this...

i want to see if it crosses over, but i have never had the room or time to try it.

------------------
[email protected]
99 Pearl SS
NJ Prelude Group
Worst Page Ever

 

[PassatVR6]

yeah that sounds like a really good idea Mmm HMmmm.

 

[kckckc]

<font face="Verdana, Arial" size="2">Originally posted by Prelude Ed:
please explain this...

i want to see if it crosses over, but i have never had the room or time to try it.

</font>

Many of us tried it.
You can do it at a mall parking lot when
empty (like middle of night).
i recall that you hit vtec at around 35mph.
make sure you don't try to steer; just hold
straight.

another stupid thing to do.. Tom Green style..

KC

 

[johnsoncranium]

wait..you guys know taht the reverse gear isn't capable of reaching that high of an rpm, right?

------------------
kimchi cures cancer

 

[Guest]

Yeah, what kckckc said.... just a note, don't steer unless you have alot of room

------------------
Malken00
[email protected]

 

[baked]

<font face="Verdana, Arial" size="2">Originally posted by johnsoncranium:
wait..you guys know taht the reverse gear isn't capable of reaching that high of an rpm, right?

</font>

huh???

 

[jkoc]

this post is hilariousssssssssssssssss

 

[pter]

<font face="Verdana, Arial" size="2">Originally posted by johnsoncranium:
wait..you guys know taht the reverse gear isn't capable of reaching that high of an rpm, right?

</font>

You can do it if you have your ebrake up

 

[99prelude]

hahahaha this thread again

------------------
David [email protected]

ICQ UIN: 4310950
AOL SN: Poena97

 

[Gen Five]

ha ha ha ha! are you guys serious? I didn't think our cars were capable of that speed in reverse. Please tell me you're kidding.

 

[desmat]

just do a second reverse gear conversion and you'll be able

------------------
Mathieu
Founder,Montreal Prelude Club

 

[pter]

dood... I heard about that conversion!
it's like from kwayfe or something... supposed to only cost $16... but what a difference!

 

[Guest]

<font face="Verdana, Arial" size="2">Originally posted by johnsoncranium:
wait..you guys know taht the reverse gear isn't capable of reaching that high of an rpm, right?

</font>

Lies!

 

[SADWAP97]

you guys should try auto-xing in reverse.
that will be the true test of your driving ability.

 

[BlackMagic]

<font face="Verdana, Arial" size="2">Originally posted by SADWAP97:
you guys should try auto-xing in reverse.
that will be the true test of your driving ability.

</font>

using your mirrors...you cant look backwards

 

[99Prelude_LC]

somebody just go to a dealership and test drive a prelude and try it!!!

I heard it was done a while back last year when we had this thread hehe

 

[DYI01]

do this, go get some plastic trays and go tray sliding in a big parking lot its REALLYY FUN

------------------
Dan Yi
99 Pearlwhite Sportshift
15.45 @ 92.37
www.MICrew.net

 

[spite]

I've done it.

I also tried to do a burnout in reverse... that didn't work so good - burnt clutch, lots of revs, little go. Thankfully, it was in the demo 'lude at the dealership when they told me they would have to hold my car for the weekend =P

------------------

 

[dangerzone]

If you have a lot of room. you should reverse and accelerate to a certain speed, then steer the wheel plug pull up the e-brake hard. Then shift to first gear then you are done with a 180 degree. I have seen couple ppl doing this pretty cool, but you might need a new tranny. Remember, you need to have a big enough place to do it, I have seen ppl hit curbs by doing that. Well, always need more practice.

reverse will make you a RR lude + rear wheel steering, instead of FF.



[This message has been edited by dangerzone (edited April 03, 2001).]

 

[BlackMagic]

<font face="Verdana, Arial" size="2">but you might need a new tranny.
</font>

just a minor inconvienence

[This message has been edited by BlackMagic (edited April 03, 2001).]