Honda Prelude Online banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
So today i’ve purchased a clutch kit for my 2000 Prelude and I can not afford to take it into a shop so i’m going to do this with a friend at his house! we have most of the regular things we should need such as hydronic jack, jack stands, breaker bar, socket set etc.. but neither of us have ever done this before and i can’t find a good video on how to, i will be starting in 2 days so any information is useful!
What i think i’ll have to do
1.) Disconnect n remove battery, intake, stater motor
2.) drain tammy oil n the lift the car
3.) take off tire and try to deal with lower control arm to get that out of way
4.) unbolt the clutch cable
and that’s as far as i’ve gotten so far so anything helps
19753
 

·
Registered
Joined
·
113 Posts
First of three parts on YouTube. There are other ones that might be better.
<iframe width="560" height="315" src="
" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
 
1 - 2 of 2 Posts
Top