Honda Prelude Online banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Im working on 99 prelude Just swap fromh22a4 to a h22a jdm motor .In front of old motor has two crankshaft position sensor no place to bolt them on new motor if anyone can give me info how to make this motor run it would be greatly appreciated or will it run without them hooked up.:bigthumb:
 

·
Registered
Joined
·
67 Posts
Use the search feature....You need to swap the oil pump, distributor, coil, timing cover, tdc sensors crank sensor, vtec pressure switch, oil pan (i believe). Or just leave it alone and dont convert to OBD2
 

·
Registered
Joined
·
263 Posts
the two sensors your talking about is tdc sensor and crankshaft senor. you need to swap oil pumps with your a4 or get a 94 vtec distributor and wire your two sensors to the distributor. do a search
 

·
Registered
Joined
·
1 Posts
the two sensors your talking about is tdc sensor and crankshaft senor. you need to swap oil pumps with your a4 or get a 94 vtec distributor and wire your two sensors to the distributor. do a search
Is the 94 VTEC distributor out of a civic and if so how does it fit the h22a?
 
1 - 4 of 4 Posts
Top