Honda Prelude Online banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
H22a1. All electrical and fuel items changed out over last 5 months. Was running fine. Swapped out head and gasket for fresh Reman one. Now it starts and idles fine, but wont rev past 2k. Revs up too 2k then fuel or ign seems to cut and it chokes out, then it will rev back up too 2k again, and choke and rev and so on.

Have swapped out:
ecu - stock and chipped.
coil
dizzy

Fuel pressure is good. Have in car gauge.

Double checked cam timing and its good. Even moved intake cam back as tooth as it looked close. After adjusting it was def off and back a tooth but gave it a try any way. Same symptoms.

Checked all connectors and grounds.
Map and tps are not swapped.

Cant check CELs as light hasnt worked in months. Dont know why, bulb is good, and have swapped clusters.

Any one actually have this problem and solve it?
 

·
Registered
Joined
·
2 Posts
Discussion Starter #2
Fixed. Pinched wiring harness in right front and bad tps sensor.
Also used the service manual to find the broken wire for CEL.
I now have a useful CEL light too.
That manual is great.
 

·
Administrator
Joined
·
13,739 Posts
Glad you were able to figure it out!
 
1 - 3 of 3 Posts
Top