Honda Prelude Online banner

Anyone have the dyno for DragIII?

1111 Views 10 Replies 9 Participants Last post by  dptkfil
I want to get the drag3 turbo on my 98 SS prelude but need to know more about dyno. Anyone have it?
1 - 11 of 11 Posts
Regardless of what some people will tell you, the Drag III is NOT out for the prelude.
2
The earliest I have heard for the DRAG III kit is June. I doubt that will happen though.

http://www.importparts.com/ has dynos on their web site I think with the gen II kit.

------------------
14.6 @ 93.6mph with I/E
See less See more
what happen some peep on here have it on their lude? i thought it was out. anyone confirm this plz. Yes the one that have it, i know we got more than one peep with drag 3 kit on. How did u acquire it? and what kind of power are u gettting here
That one Luder, dptkfil, has a Drag Gen 3 on his SS. Why don't you go ask him.

------------------
-= VENGEANCE RACING =-
-=CODENAME: VERONICA=-
- 2K Gen5 H22A VTEC SS
- Spectra Blue Mica
- ViS Techno R Full Body

"Get Your Boogie On Gangsta... C-Walk Homie!"
it doesnt make sense, im sure the drag III kit is out too. dptkfil has one and has pics along with another guy with a white lude here that also has pics...

------------------

Crystal Blue 99' SS Lude (born on 7/1/99)~when i got it
CURENT MODS:
-AEM CAI (silver)-DC Sports CC 4-2-1 Headers
-Tanabe Racing Medalion -Apexi V-AFC -autometer A/F gauge -autometer EGT gauge -zex kit w/ plugs running 55 shots -NOS purge kit
HAVE AND INSTALLING SOON:
-UR pulleys set SS

screen name: CBFORMULA
See less See more
Yeah they are both from Norther Cali, too. I hella want one too! Shizz.

------------------
-= VENGEANCE RACING =-
-=CODENAME: VERONICA=-
- 2K Gen5 H22A VTEC SS
- Spectra Blue Mica
- ViS Techno R Full Body

"Get Your Boogie On Gangsta... C-Walk Homie!"
drag 3 is not out.

[pics] www.rspec.net/purelude

only drag 2 is out.

drag 3 is sched. to come out this summer. expect delays cause it was said to have come out in early spring.


Tim
dptkfil and dragen have the drag II with different intercooler and wastegate I believe.
Well, if you guys say my turbo kit is Drag II with different intercooler. That fine with me, but I met DrgGenIII yesterday, and we were testing each other prelude. Both of our ludes need some tunning. He got boost leaks on his lude and his turbo lacked. Mine is running too rich at higher rpm. I am still waiting for my MSD, so that I can solve my problem. Also, I need to get a Mugen computer brain for my car to bypass obd2 and other stupid $hit and put stright pipe. DragGenIII will dyno his car pretty soon with his friend turbo integra, but I will wait. I need to rebuild my engine and swap my transimission. I will let you guys know what up?
To tigerr67:
I like most of my turbo kit, except the wastegate. First I set my wastegate at 8 psi, after a while the wastegate will lower the boosting by itself (don't know how and why?). It lower mine to 5 psi right now. I will reset my wastegate today. Also, I don't recommand Turbo on SS, it will mess up the tranny if you don't shift the gear right. DragGenIII had mess up his trans, but he got it replace under warranty (of course he had to uninstall his turbo kit)... You can get a level 10 tranny, but for me I will swap the trans to manual. Good Luck!

------------------
2000 Prelude SS
Drag Gen III Turbo
Custom Daul Exhaust
VIS Body Kit
Custom Body Works
Kameleon Kolor paint job
Apexi Boost Controller
AutoMeter (air, fuel, boost gauges)
Greedy Blow Off Valve
Greedy Turbo Timer
Missing Link Map Bypass Valve
Spearco water injection system
More is coming
Tein HA
yokohama AVS model 6
Unorthdox Pulley
MSD
Spoon Front & Rear Strut Bar
Spoon Lower Tie Bar
See less See more
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top