Honda Prelude Online banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I've got a 1999 Prelude Vtec.
I rebuilt the motor and took the turbo off. The problem i am having, is i feel its running a little rough. I've checked all sparkplugs at each cylinder, they are firing. I've lined up the marks on the timing belt and the flywheel, they are lined up. Car starts fine. When checking the ignition timing, i can see the 15 mark, but when i adjust the distrubtor, it does not change the location of the mark. Anyone have any thoughts why the turning the distubtor isnt changing my timing. I do suspect that my vaccum lines might not be right because i took off the turbo. any vacuum line pics on 1999 stock h22a4 might be helpful.

Thanks...
 
1 - 2 of 2 Posts
Top