Honda Prelude Online banner
1 - 12 of 12 Posts
G

·
How much further out will a 32mm offset rim (like a 7, 7.5, and 8 inch wide rim) stick than stock?

------------------
Billy
North Texas Prelude Owners Group
www.ntpog.org
 

· Registered
Joined
·
33 Posts
32 mm ? it wont do.

------------------
98 BASE PRELUDE
NAK CD45z
ID CHAMELEONS
PPI PC 2200
CRYSTAL CMP 10
KICKER ZR 360
 

· Registered
Joined
·
180 Posts
32mm will have contact patch showing past the fender. I used to have 38mm and they were barely legal. Rubbed in the back with stock suspension.

------------------
Marshall McLean
97 Prelude SH
<A HREF="http://www.hondaprelude.to" TARGET=_blank>
</A>

My Home Page

[This message has been edited by Marsh (edited March 26, 2001).]
 

· Registered
Joined
·
441 Posts
I have 43mm and they are flush with the lip of the wing!
I need some mods for me to go lower!
32mm will so not fit is beyond a joke!


------------------
UK LUDER!:)
HONDA-R UK Member
5th GEN 2.2 VTI 4WS Manual
 

· Registered
Joined
·
336 Posts
verify the offset will your supplier, and make sure they are aware of what kind of car you have. The worst thing in the world is to get a new set of wheels and they don't fit so you have to send them back.

------------------
99 Red 5spd Prelude=AutoX
90 auto Accord sedan=DD
AIM: Jvtecsho
 

· Registered
Joined
·
345 Posts
<font face="Verdana, Arial" size="2">Originally posted by 71dsp:
How much further out will a 32mm offset rim (like a 7, 7.5, and 8 inch wide rim) stick than stock?

</font>
7"--29.35mm(1.15") for the actual rim edge
7.5"--35.7mm(1.4")
8"--42.05mm(1.66")

stock(205) (215) (225)for actual tire
23mm(.9") 28mm(1.1") 33mm(1.3")

[This message has been edited by Aaron97SH (edited March 26, 2001).]

[This message has been edited by Aaron97SH (edited March 26, 2001).]
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top