Oil Time...
CAUTION: Remove the drain bolt carefully while then engine is hot oil may cause scalding
1. Warm up the engine
2. Drain oil. (carefully loosen the drain bolt, oil will come out)
3. Remove the oil filter with the special oil filter wrench. (oil filter is to the left of the exhaust pipe if your under the car looking up)
2. Inspect the threads and rubber seal on the new filter. Whipe off seat on engine black, the apply a light coat of oil to the filter rubber seal.
3. Install oil filter by hand.
4. After the rubber seal seats, tighten the oil filter clockwise with the special tool.
5. Reinstall the drain plug with a new washer.
6. refill with the recommended oil.
7. Start car and let run for 3 mins and check for any leaks.
8. Go have a smoke, your done!
Linear Mode
