Once again, I got another write up for you to read.
I had to open up my interior in order to get to my striker plate since the threads were stripped.
However, maybe someone can find this write up useful for their own purposes.
*** STEP 1 ***
Remove the top portion of the seat.
Fold down the seat and you'll noticed two plastic tabs on either side of the seats. (One at each corner)
Carefully remove the plastic tabs.
*** STEP 2 ***
Pull back the carpet and you'll find a bolt that needs to remove.
Unbolt it and swing the hinge off the seat.
Now, the entire seat can be removed from the car.
*** STEP 3 ***
Next, Remove the bottom portion of the rear seat.
This is fairly simple.
Just pull on it and the front of the seat will pop out.
It is held by two loops (one on either side) attached to plastic taps located on the car.
Here is a picture of the loops.
*** STEP 4 ***
Push the seat belt buckles down through the opening.
*** STEP 5 ***
Pull down on the sleeves and remove the seats from the car.
There are two sleeves.
*** STEP 6 ***
Remove the hinge from the top portion of the rear seats.