itsthatone

This is my first post on this site. I have a question about what lug nuts I need to use on my car. I have a 5th gen lude with 2002 Acura Rsx wheels (NON type s). The lug nuts I am using right now are aftermarket and have a lip on them, and I was told that they need to be acorn shaped for honda/acura wheels. My question is: will the stock prelude lug nuts work with these wheels? Or do I need to get a different size? Any info would be greatly appreciated. Thanks in advance!

indylude18

Yes.

Don't use aftermarket lugs with factory wheels because the seat is usually different. OEM lugs are flat on the bottom, tuner lugs typically are conical shaped.

__________________


Bluetop H23a Vtec Swapped NHBP '99 Base

itsthatone

I just wasn't sure if they work with eachother, but that clears it up. Thanks!

Honda4Life

02-04 RSX rims are the same as the 02-04 RSX-S rims BTW. As stated use the OEM Prelude lug nuts. If ya need a set PM as as I have a set to get rid of.

__________________
PreludePower.com is a joke and is ran by kids. The Off Topic Whores and the MODS who require being respected and threaten people when they feel they are not. What a joke. BTW, don't ask them a question as they will answer with a ban.

SoCalPrelude.com MODS only inforce rules on some and not on all. Kyle is a joke.

BTW, Eric Schultz in CA is a known scammer. He did it to me, he can do it to you. Just a heads up. Know as "backinblue92" here on PO.com

patconor

Most aftermarket wheels require tapered or tuner style wheel lug nuts. OEM is the only wheel I know that uses acorn. So go for the OEM.