JrSr2003

Everything on my setup is complete except for one thing. I was seting up to splice my fuel line with the tee that came with the NX kit, and to me it looks like the tee is too small. Does anybody know if it will fit? The fuel line looks like it will be too big for the tee to plug it up.

Do we have a fuel test port that i can hook it up to?

btw It's is a wet NX kit on a 01 lude.

__________________
AEM True Power Pulleys/ iceman CAI/ vibrant headers/Hondata IM Gasket/ Carsound 2.25 cat/Rsr Exmag/ NGK wires/act HDSS clutch/ACT 12 lb flywheel/JDM M2B4 LSD tranny /Hondata S300/ EBP Lude 5 speed

Vapor

that's what teh hose clamps are for. you have to clamp down the fuel line around the tee. Once it's all installed and clamped down (on ALL sides of the T) turn the key to "on" The system will pressurize and any leaks will be obvious.

I don't have any issues with it.

typeshlude

Yes, that small looking tee fits perfectly on the stock line. The stock fuel line is super thick, so looks can be deceiving

__________________

JrSr2003

Thanks for the posts. It has been really helpfull. Well Nitrous is done... Now I just have to test it!!

__________________
AEM True Power Pulleys/ iceman CAI/ vibrant headers/Hondata IM Gasket/ Carsound 2.25 cat/Rsr Exmag/ NGK wires/act HDSS clutch/ACT 12 lb flywheel/JDM M2B4 LSD tranny /Hondata S300/ EBP Lude 5 speed

typeshlude

Good job! Be sure to check your plugs after some test runs and make sure you're not running lean.

__________________