Here's the link for the pics....
http://www.cjschmit.com/Phsyko%20Mot...ts-prelude.htm
The red oval under the hood, repesents or highlights the fuel pressure switch, which is located on the banjo bolt way down on top of the fuel filter.
The red oval under the dash highlights the micro switch.
The oval in the interior shows the unlit LEDs in my gauge trim bessel.
The next pictures show the lit LEDs and the colors represent the following...
Blue is the remote bottle turn on indicator
Green is the arming switch light indicator
Red is the bottle warmer indicator, which turns off when the bottle is warmed up and ready
Yellow you can't see this one but its between the green and red, this one light up when the NOS is actually engaged.
I also hooked up a relay and a resistor to all 4 lights so at night when its dark it will dim the LEDs when my parking lights are turned on.
The solenoids and relay are located under the fuse distrobution. And sooner or later the trunk floor will be raised up 3 inches and my bottle, 2 amps and a sub will be all conceiled in my spare tire well. I also have plans for 3 gauges and my VAFC to all be fiber glassed into the glove box and covered in a nice black vinyl finish. So what do you think, kinda trick huh!?
Linear Mode
