Anyone familiar with the NOS 05123 kit.. - Honda Prelude Forum

vooboo13 · 10-05-2003, 09:29 AM

I looked at the install sticky for that kit, but the part about where the tubing goes from the blue metal solenoid-like piece isn't on there. Here are the pictures that it gives:

Here are the solenoids: The purge is first, then an n2o solenoid, this "blue" thing, and another n2o solenoid.

See that black tubing coming out of the blue thing? Where does that go to?..

The article also gives another picture after that, but says nothing about what it came from, so I'm not sure if it's connected to the blue thing:

I'm guessing it's the tubing heading towards the top of the picture with the blue nut and the "T" that splits. Is that a fuel pressure regulator?

One last Q, what is the sealant stuff used for when you tighten the fittings onto the solenoids. It's white...

NXLude · 10-05-2003, 11:54 AM

the sealant is probably teflon paste.....very necessarry for a good seal

vooboo13 · 10-05-2003, 02:25 PM

Oops.. worded that wrong, wanted to know what it was not what it was for. Anyway, you still answered the question so thanks!

FoShizzleLude00 · 10-05-2003, 11:20 PM

Quote:

Originally posted by vooboo13

I'm guessing it's the tubing heading towards the top of the picture with the blue nut and the "T" that splits.

Yes, what you have stated there is correct. And the tubing that goes toward the bottom of the picture connects to your car's fuel pressure regulator.

Check in your other thread for the 05123 pdf file i hosted, it has some diagrams that will explain it better than words.

slp mode · 10-08-2003, 10:04 PM

That's right the vacuum line goes to your fuel pressure reg.