Just got a Turbonetics kit for my 01 and unexpectedly it came with a water cooled bearing section. I'm glad it is water cooled, by I have no idea where to tap the coolant system.
I searched and found a few references to people installing water cooled turbos, but none said where to tap the coolant system.
Can someone provide some insight on this please..
Thanks In Advance!
-Scott
__________________
2001 LBBP Base Manual
+ADVAN AVS Model 6 18"x7.5" +INJEN CAI w/AEM Bypass +Spoon F/R Upper Ties +Tanabe Sustec F/R Lower Ties +Skunk Rear Lower Tie +Progress Rear Sway & Endlinks +TEIN HA Coilovers w/piloballs
-Handles & Emblems
Turbonetics Kit on the way!
Quote:
Originally posted by ElectronLude44 I have a girl. She's wonderful. Her name is Prelude.
She's petite, blue, and very eye catching. She's loud when she needs to be, and she loves to scream when I romp on it.
No one? I was thinking about the lines to the heater core, but I would imaging those aren't the best as I'm guessing they are on the hot side of the system.
Suggestions or ideas please!
__________________
2001 LBBP Base Manual
+ADVAN AVS Model 6 18"x7.5" +INJEN CAI w/AEM Bypass +Spoon F/R Upper Ties +Tanabe Sustec F/R Lower Ties +Skunk Rear Lower Tie +Progress Rear Sway & Endlinks +TEIN HA Coilovers w/piloballs
-Handles & Emblems
Turbonetics Kit on the way!
Quote:
Originally posted by ElectronLude44 I have a girl. She's wonderful. Her name is Prelude.
She's petite, blue, and very eye catching. She's loud when she needs to be, and she loves to scream when I romp on it.
Hey man, i faced this problem as well, i cant take pictures right now but i can get you some tonight. The heater core is the right choice and it is super easy to do. Once the coolant starts to flow the "hot side" wont matter because it will always be cooler than your turbo, also the heater core coolant constantly flows, if you tap into the throttle body or thermostat houseing you wont get constant flow due to idle valves and the thermostat openin and closing. Ill post pics tonight of what i did, you just need 2 brass t's that you can buy from lowe's that match the diameter of the hose you are using, about 8 or 9 feet of hosing from autozone, and 6 of those screw type hose clamps.
__________________
2001 LBBP Base Manual
+ADVAN AVS Model 6 18"x7.5" +INJEN CAI w/AEM Bypass +Spoon F/R Upper Ties +Tanabe Sustec F/R Lower Ties +Skunk Rear Lower Tie +Progress Rear Sway & Endlinks +TEIN HA Coilovers w/piloballs
-Handles & Emblems
Turbonetics Kit on the way!
Quote:
Originally posted by ElectronLude44 I have a girl. She's wonderful. Her name is Prelude.
She's petite, blue, and very eye catching. She's loud when she needs to be, and she loves to scream when I romp on it.
This is he.. Has been quite a while... glad to be getting back in the garage for a change
__________________
2001 LBBP Base Manual
+ADVAN AVS Model 6 18"x7.5" +INJEN CAI w/AEM Bypass +Spoon F/R Upper Ties +Tanabe Sustec F/R Lower Ties +Skunk Rear Lower Tie +Progress Rear Sway & Endlinks +TEIN HA Coilovers w/piloballs
-Handles & Emblems
Turbonetics Kit on the way!
Quote:
Originally posted by ElectronLude44 I have a girl. She's wonderful. Her name is Prelude.
She's petite, blue, and very eye catching. She's loud when she needs to be, and she loves to scream when I romp on it.
here are the pics, i tapped the heater core line on the left side of the engine close to where the battery is and behind the intake manifold, as long as you tap on each side of the heater core you should be fine, its hard to see the tap on the back side of the engine because i couldnt get the camera in there. Hope it helps
__________________
2001 LBBP Base Manual
+ADVAN AVS Model 6 18"x7.5" +INJEN CAI w/AEM Bypass +Spoon F/R Upper Ties +Tanabe Sustec F/R Lower Ties +Skunk Rear Lower Tie +Progress Rear Sway & Endlinks +TEIN HA Coilovers w/piloballs
-Handles & Emblems
Turbonetics Kit on the way!
Quote:
Originally posted by ElectronLude44 I have a girl. She's wonderful. Her name is Prelude.
She's petite, blue, and very eye catching. She's loud when she needs to be, and she loves to scream when I romp on it.
Linear Mode
