Quick Turbo Timer Help - Honda Prelude Forum

H22cm · 06-20-2002, 12:53 PM

Okay, this is REALLY confusing me!!! This is what I understand...for the 5th gen adn a Blitz FATT

(CAR)
IG1 BLK/YEL
IG2 YEL
ACC WHT/BLK
BAT WHT(12V power source)

(TURBO TIMER)
Green wire Goes into Black and Yellow wire
Red wire goes into White (Battery)
Black wire goes into Ground
Blue wire goes into White and Black

Is any of this correct???

akuma · 06-20-2002, 01:51 PM

I've seen a reply for this kind of question before.

Always try searching first. You might be able to find answers before you post.

H22cm · 06-20-2002, 02:06 PM

I have searched! and I have posted before. I just want to make sure all the jumbled info I have recieved is correct. I took every turbo timer install message and came up with this. So can someone let me know if it's correct....

Thanks

Chris

Quaalude · 06-20-2002, 05:27 PM

http://www.greddy.com/technical/TurboTimer_Frame.htm

IG1 (black/yellow)=green
IG2 (yellow)=blue
12V (white)=red
ground=black

H22cm · 06-23-2002, 01:01 PM

Can someone PLEASE let me know if this is correct

IG1 (black/yellow)= green
IG2 (yellow)= blue
12V (white/black)= red
ground= black

Quaalude · 06-23-2002, 01:37 PM

no, it isn't correct...12V (white)=red....if u look on the greddy website where i posted the link to, it says that if u have 2 ingition wires, the green goes to the wire that does not drop voltage whenever the starter is activated and the blue wire goes to the other wire....if u look in the Helms, page 23-56, it has a chart that shows which wire does not drop voltage whenever the starter is activated and that wire is black/yellow (IG1)....this is how i hooked up my apexi turbo timer and it has the same color coding as the greddy

H22cm · 06-23-2002, 01:42 PM

IG1 (black/yellow)=green
IG2 (yellow)=blue
12V (white)=red
ground=black

So this is correct? So nothing goes to the Black/White Wire??? Where is the White wire???

Thanks again

Chris

Quaalude · 06-23-2002, 01:50 PM

i thought u had the greddy so that is why i posted the link....i just read that u have the blitz, but the color code u posted are the same for the greddy and apexi....white wire leads to above the driver's side kick panel....if u follow the other ignition wires, they go to the driver's side kick panel also....just look in that area and you'll see a thick gauge white wire with the other ignition wires