Ludster

Any1 here (4th Gen) with an intercooler and JDM fogs? Pics?

I mounted my Precision Mid-size IC, but I had to lose the bumper support. That means I gotta find a different way to hold up my bumper....

__________________
Socal - Darker Images
1993 Prelude SI

preludestud11

lol. I mounted my fmic to my bumper support.

__________________

ChrisRicketts

i don't know if this counts because i have a 5th gen, and no fog lights......but i welded tabs onto the lower frame that the radiator tabs are on, and the intercooler sits on them. i curved the end of them so it can't slide outward. it's about as close to the car as you can get it (it's almost touching the frame). i'll post pics as soon as i get them loaded in my pc.

__________________

Ludster

thanks for the replys guys, pictures would be great. i'm thinking about putting some bottom brackets as well so the IC doesn't sag after some time.

I'm going to post some pics of what I have done. Had to remove the middle section of the bumper support to fit the IC in.

__________________
Socal - Darker Images
1993 Prelude SI

rayslude

mine has a single bracket on top that lines up with the bolt that the horns are on and theres 2 brakets on bottom that go to existing holes on the frame, it's held on by 2-10mm bolts on bottom. This allows me to keep my bumper support...

__________________

Ludster

Hmm.. Also on the side of the intercooler there's threaded holes for mounting. You guys know what the thread size is on those?

__________________
Socal - Darker Images
1993 Prelude SI

Ludster

nvm, i figured it out.

I think I used 5/16" coarse threaded screws.

i'll post some picks when i'm done. thanks for the help guys

__________________
Socal - Darker Images
1993 Prelude SI