railsldr

I am getting ready to start building my motor for turbo but was wondering about some things. If possible I would like to get all the parts pistons, rods etc.... before I buy the motor. Would this be possible or would I need to get the motor and everything first for my measurements. Because if I buy the motor first then I will need to put it in storage while I save for all the other parts seeing as I dont have space here at home to do it.

__________________

LUDExCONDUCT

If you're going to keep the stock bore of the motor, you can just get the motor later, and buy off the shelf pistons and rods now. Even if you buy oversized pistons first, whoever is going to do the machine work for you can bore the cylinders out to the size of the custom pistons you buy.

__________________

"Idleness is the holiday of fools."
"Evil is powerless when the good are unafraid"

-JAMES-