Ok, 3 months later I am finally getting the turbo put on. Listed below is everything has been put on and what is about to go onto my car. When I get it tuned next week my hp goal is going to be between 350 - 400. But We will see... Oh ya, I also put the prices and places where everything was bought. Not that everyone really cares but since I had it on my list I thought I would throw it in there as a reference point for some of you who are wondering what a project like this could cost. Hopefully, this will be helpful to some of you. Once the car is tuned I will post the tuning video and dyno sheet and all that other good stuff up here. Thanks to everyone for all the good information!
Take care...
Jonathan Allyn
---------------------------------------------------------------
This is just my car with the body work. I will post the turbo pics when they are finished with it.
Honda Prelude Turbo Parts list:
Lightning Motorsports: - $1,119.00 / Purchased
JE Pistons 9.0:1
Eagle H-Beam 2 piece forged rods
JE Rings & Pins
Skunk2 (5 way adjustable) Cam Gears ? $175.00
ARP Head Studs - $130.00
After Hourz Performance: $608.00 / Purchased
Darton Sleeves - $510.00
Cometic Head Gasket PH coated (lowers compression to 8.6:1) - $98.00
Ebay Auctions: $2,088.99 / Purchased
HKS Type 1 Turbo Timer - $106.00
HKS EVC III Boost Controller - $187.00
Hondata Stage 2 w/ Boost. re-chipped with base map ? $315.00
P28 ECU - $150.00
Siemen 550cc Fuel Injectors ? $210.00
3 Bar map sensor - $90.00
Short Shift Kit - $28.00
High Flow Cat - $60.00
Mugen Oil Cap (red) ? $20.00
NGK Iridium Spark Plugs - $25.00
Walbro 255lph fuel pump ? $105.00
8mm Spark plug wires (red) - $32.99
Auto Gauge 3" Tachometer - $100.00
Motor x Boost Gauge ? "gift from John"
VIS Black Widow body kit w/ Omega rear bumper - $600.00
Axis Racing Ceramic/Kevlar brake pads - $60.00
DragTurboKits.com:
Custom Spec. Turbonetics To4/T3 turbocharger w/ 57mm housing
Tial external Wastegate
Greddy Type-S blow off valve
2 1/4 in, 2 1/2 out chromed intercooler piping
Large Spearco front mount intercooler with polished cast aluminum end tanks
Cast iron 4into1 high flow turbo manifold with high temperature silver coating
2 1/2 inch mandrel downpipe w/ O2 sensor bung & high temperature black coating
High flow DRAG intake system with funnel ram filter
Map sensor check valve bypass assembly
Heavy duty black vacuum line
Steel braided Goodridge dash-8 oil feed line
Misc. OEM parts from Honda: $740.67 / Purchased
Main Bearings - $70.20
Rod Bearings - $62.64
Oil Pan Gasket - $13.82
Rear Seal - $9.83
Front Seal - $ 4.33
Cam Seals ? $6.52
Valve Cover Gasket - $6.58
Spark plug seals - $5.04
Oil Bearing seal - $1.06
Valve Gaskets - $15.00
Timing Belt - $30.66
Adjuster - $85.99
EGR Valve - $105.00
Drivers Side Motor Mount - $97.00
Front Side Motor Mount - $47.00
Knock Sensor - $90.00
VTEC Solenoid - $90.00
Nopi: $300.00 / Purchased
Center Force Dual Friction racing clutch ? $300.00
Running Parts Total Shipped ? $7,536.66 / Parts left to buy - $.00
---------------------------------------------------------------------------------
Labor costs: (Walker Engines & Warped Speed & Sound)
Sleeve Install - $600.00
Long block engine break down & rebuild - $300.00
Misc. Engine work - $325.00 (Balancing the crank, Valve job, Crank
Polishing, pressure testing the head & block after sleeving)
Misc. gaskets & parts - $402.96
Engine removal & install - $750.00
Turbo Kit Install & 2 hours of Dyno tuning - $750.00
Body kit painting & Assembly - $600.00
Labor Total = $3,727.00
Complete total ? $11,263.66[IMG]
Linear Mode
