ludetech

I have a manifold coming that is non ac compatible and I am removing my a/c what do I do about the belt that ties around the alternator and the a/c

__________________
I WILL PWN YOU!!

 

MNludeDVR

I measured the distance around the alt and crank pulley with a tailor's tape measure...i have an aem pulley on my alt and my length was 39". I do have a 4th gen, not sure if any different, i'd assume not.

__________________
-Adam
-boosted bb1 :: 422whp, 305trq

geramy

Pretty much what MNludeDVR said, measure around all the pulleys for the belt in question, and take that measurement to a parts store. They should be able to find a belt that will work

__________________
PFI Sleeves, Eagle Rods, Arais pistons, Supertech Valve Springs, Supertech Retainers, JR Supercharger reworked by ENDYN, Ported intake Manifold, Ported "S" tube, Skunk 2 Throttle body, AEM CAI, Hytech Header w/3" collector, Custom 3" Exhaust, Meizer Electric Water pump, Neptune, MSD SCI-L ignition, MSD Blaster 2 coil, walbro 255 fuel pump, AEM fuel rail, 1000cc Precision Injectors, FJO Fuel Injector Driver, auto to manual tranny swap, Quaife LSD, Motor Mount inserts, and a little secret...