Where to get these lights? - Honda Prelude Forum

aaron7 · 09-30-2010, 12:09 PM

My 92 came with lots of holes in the front where lights go... don't ask

Stole this pic from 94_lude_vtech as his car is beautiful

The circled parts are missing on both sides. I rather not have orange OEM ones so where could I find the clear ones?

cburnscrx · 09-30-2010, 12:50 PM

This is easy....eBay. They're not expensive and you can get them in either clear, or black (which I think look good on a black car).

iSAW · 09-30-2010, 01:26 PM

92-96 HONDA PRELUDE 4PCS CLEAR BUMPER LIGHTS 93 94 95 on eBay.ca (item 390244109157 end time 01-Oct-10 10:07:27 EDT)

aaron7 · 09-30-2010, 03:54 PM

Wasn't sure what they were called so my searches didn't yeild any results.

Thanks for the link!

S-LudeDan · 09-30-2010, 07:19 PM

get the 94-96 usdm inner lights (clear with a bit of orange reflector) and edm outer ones (all clear). Keep in mind you have to dremel out the slots for the light bulbs in the back since edms and jdms are only reflectors.

stay away from aftermarket!

BlueLudeSI94 · 09-30-2010, 08:52 PM

Got em from ebay. Got clear decent fit. They are fine and a lot cheaper...

aaron7 · 10-01-2010, 05:31 AM

Quote:

Originally Posted by BlueLudeSI94

Got em from ebay. Got clear decent fit. They are fine and a lot cheaper...

Did you have to do any modding to get them in? Or direct bolt in?

BlueLudeSI94 · 10-01-2010, 09:57 AM

Direct fit. Four screws. The inner ones are a pain cause you cant see them and its at an angle.
You should have little metal pieces like clips that the screw will go into.
The gluing/construction of the actual pieces is slightly sloppy when in your hand but you cant tell at all when in the car.
*One was slightly loose so I used a hairclip/pin (found on the ground) behind it then screwed it in. Now it doesn't move/shake. Solid looks good on the white Lude,its like the lights are all whited out, no orange.

I guess most importantly they fit the bulbs fit well and they seem water proof and now no shaky shaky.

BlueLudeSI94 · 12-08-2010, 05:20 PM

Update- The clear cheap set leaked moisture on rainy days... I picked up some sweet Jdm ones..

minilogoguy18 · 12-08-2010, 05:52 PM

^The JDM ones are no different than the USDM ones, should just bought new OEM, more than likely payed just as much for the 'JDM' ones that are no different other than being old and used.

BlueLudeSI94 · 12-08-2010, 07:32 PM

Nope, They are different, specifically the side pieces. (Have to Dremel for bulbs)
I payed less than Oem American/USdm...
$45 Usdm-50-100for all four pieces

minilogoguy18 · 12-08-2010, 08:00 PM

Only thought that was on euro models, the side is a reflector and not a light because they have side markers on the fenders.

aaron7 · 12-11-2010, 06:55 AM

Bought the smoked ones from ebay. I think they look great! Also got the matching side markers for the rear and some black tails to replace the altezzas that were on the car.

Now to replace my front bumper cover!