ophdeheezy

Aight, I just dropped an H22.. now i just need to wire up the VTEC.

I dont have either harnesses for the Oil Pressure and VTEC Solenoid, Can i just tap the wires?

And at the ECU, What should I do? Should I tap the wires at A4 and D6 or should I connect them all the way to the pin?

Is it necessary to run a wire to the knock sensor?

Anything else?

elprez2000

you have to push them into the the pins, just tap the wires (better if you clip and sodder though) and then run it into your cabin to your ECU and then push the proper wires into the A4 and D6 with a paper clip. and your done!

__________________
1992 Honda Prelude Si w/JDM H22
So JDM I even drive on the left side of the road.

red92s

I knew adding this to the FAQ would come in handy some day:

H22 sensor/ECU wiring

__________________
7/20/2000 - 4/09/2007

Replaced with: "Zoom-Room"; 2003 Mazda Protege5

ophdeheezy

hmm.. theres 2 metal stick things coming out of the vtec solenoid.. (sorry to sound newbish) do both go to a4? or one to a4 and one to ground? thanks guys

93PreludeS

hey elprez, i just saw your interior, man thats awesome.. how do you get the tweed to stick? id like to learn to do that..

p.s. sorry for ninja'ing your thread on vtec ecu ...

CrazyKid

onei s a ground.. and one goes to A4

__________________
the answer is ... more power