debo

OK guys I posted about this before but no body knew, hopefully maybe the new members know. I have a VIPER 600 alarm in my car right now. Its the old school kind. It didn't come with a valet push button like most or all of you guys are familiar with , instead it had an old school toggle switch. This is just a VIPER 600, not the 600 efs, es, etc... I have windows rolling up down, and all the fixings, but my problem is the previous owner turned off the sound and has no idea how to turn it back on. I tried the tradition VIPER methods but didn't work.

What I need are instructions on how to program that alarm. Unfortunately, VIPER.com didn't have it. This alarm is old school. THe car is a 93 so I figure the alarm is pre 93 through 94 production. Thanks to anyone that can help!!!

debo

Dr. James

I would say call DEI. When i was an installer, if we encountered this problem, we would call the manufacturer direct, and they would fax us a copy of the maual for the specific alarm. I have done it with DEI as well. Just give a call.

aneurysm

I have access to DEIs online database and they only list install instructions for the 600HF and 600ESP.

Does the siren not work even for panic mode?
Have you tested the siren output from the alarm with a multimeter to see if it gets 12 volts?

brad

debo

that's what I'm talking about. I have the owners manual and it didn't have any instructions. But I'm sure its just a 600 and that's it. I'll try giving DEI a call. THanks.