Fatallude

ok, the timing belt on my lude broke prematurely and im fixing it this saturday. the valves are good they didnt bend. I've been searching the net for valve springs for the lude. I have a 95 SE with the h23 in it. I just hit 53k on the odometer. Im looking to go nitrous with it later but im building it first. I want a slightly more aggressive street cam. I need the springs to handle the cam im looking to get, but I cant seem to find a good site with good info on springs for the car. Any tuners out there go any links or suggestions for me.


Michael aka Lewd

beenerachi

Is www.crower.com one of the places you looked? I figured you might have already gone there since you are looking for cams.

__________________
95 WRECKED VTEC Prelude

93si4ws

i might be selling my webcam dual springs and tit retainers w/seats an shims. its a used setup for 3k miles. got them from 71dsp. if offer is good i'll sell. you know how much these are worth
v

__________________
vern - 93 jdm 2.3vtec 4ws
please say a prayer for isai perez jR, my godson 9.28.02-3.16.03

for God so loved the world that He gave His only begotten Son,
that whosever believeth in Him should not perish,
but have everlasting life. John 3:16

fourthgeneration

I'm in the same boat as you. I've been researching connecting, rods, pistons, piston rings, and all the valve train stuff. It's pretty difficult to find any of those since most online stores just sell intakes, exhausts, and shift knobs.

I was looking through a mag yesterday and Nopi.com carries some of the stuff I'm looking for. But I'm not too sure on their service. also, a place called www.raceeng.com had an ad filled with valvetrain/ bottom end stuff also. But they said that you have to order a catalog from them.

Keep me updated.

__________________
1992 Prelude SI Type SH EBP VTEC BB1 SiR H23 DOHC 4th gen Type-R BB4 Milano Nordic Mist F22 JDM-spec 5th gen Type-S 4WS H22 EDM Mugen edition

Fatallude

well as of about 5 mins ago, i became the proud owner of another h23a long block, purchased for $300. that is not a misprint that is $300. can i just say, stroker engine. im going to custom built a stroker kit for that engine and just ride my current motor till its finished, damn i feel good, btw, still cant find shyt on valve springs for the lude. definiately going to need them now though. i was told to check ferrea. they make good valves so i guess valve springs shoud be sumthing else they make