USDM EL and JDM EL gauge Qestion?! - Honda Prelude Forum

Aznluder · 07-24-2005, 07:21 PM

So if i were going to pick up a 94si EL gauge cluster and a 94si Vtec gauge cluster,
Would i be able to just swap the JDM speedometer and RPM tack off and replace it onto the USDM speedometer and RPM ??

Reason why i am asking this is because i have a JDM 94si vtec cluster and i cant wire it up so that it would work.

95LudeS · 07-25-2005, 01:33 AM

i think the faces are interchangeable

UWNTSUM · 07-25-2005, 01:38 AM

are you talking about the needles or entire assembly?

Aznluder · 07-25-2005, 03:02 PM

The Speedometer and RPM Tack
The thin sheet that sit behind the needle.

DOHCVTEC190 · 07-25-2005, 03:11 PM

I had a USDM 96 Si EL gauge cluster and a JDM EL Gauge cluster. I swapped the faces and needles of the JDM cluster into the USDM cluster housing. You have to do some trimming but it works easily. I think that's what you're asking?

dark_rican · 07-25-2005, 03:24 PM

THE EL JDM CLUSTER COMES OUT THE SAME AS THE USDM ONE.THAT FACE OF THE TACH AND SPEEDO...

Aznluder · 07-25-2005, 05:14 PM

You guys answers all of my question.
Thanks all.

Aznluder · 07-26-2005, 01:43 AM

LAst Question!

Would i be able to Take a JDM Si Vtec Instrument cluster speedometer tack and swap it over to a USDM Automatic SI?

Would it work or the Automatic has a different wiring pattern?

I want it to work on my 92 Si Vtec. Please let me know Asap!

DOHCVTEC190 · 07-26-2005, 07:52 AM

As long as both are EL gauge clusters or both are analog clusters, you can. You'll just have to do some trimming to the gauge faces to get it to fit.

Aznluder · 07-26-2005, 04:01 PM

What do you mean by analog?
I dont quite understand thanks.

DOHCVTEC190 · 07-26-2005, 08:14 PM

there's different kinds of gauge cluster...analog or non-digital non el came in the 92-93 preludes. they light up differently.

u shouldnt have to worry though. both are yours are digital el gauges