jdm.ALLDAY

this is not my car, i do not know this person, just using picture as an example.

How do you wire the bumper lights/signal lights to where instead of parking lights on outer sides, it lit up on the inner lights like so:

anybody know?

__________________
1992 BB2 Si H23a3

spin_r_g

He has real jdm turn signals. Since the outer ones are blank and do not have a bulb he probably just cut the harness and wired the outer to the inner.

__________________

gotjnco

ROFLMAO... thats my buddy Alan... we were in San Diego... huge prelude meet... ol' good old times... *sigh*...

well anywho... i asked him and he said you need dual filament bulbs...

__________________
Estebuns
I'll eat your rice with my spoon!
Soy Guapo... Fulltime...

el_baby

it could be done like spin_r_g said... changing the wiring

maybe using a diode - to make both light but also would change the alternating signals to a maybe always on while you have the signal on, unless you cut one of the wires
and

maybe using a relay


i looked to the helms and didnt found the wire that make it turn on when the running lights are on... but I bet it will be a conection with a red/blk but where idk... i beleive there are only two wires for each bulb

jdm.ALLDAY

hahahah forreal!!!!?? that's what's up his car is sick as hell.. very inspiring hahaha..

thanks for asking him though i appreciate that, and i'm going to look into it.

EDIT: lol oh and tell him he made my computer desktop background for about a month hahah i really like that ****

__________________
1992 BB2 Si H23a3

jdm.ALLDAY

yeah two for each bulb is correct, just not sure which ones to cut and swap. I've been skeptical about cutting them even though its an easy fix..

but i'll mess around with it and try to find some wiring diagrams on the net..

thanks for the info

__________________
1992 BB2 Si H23a3

jdm.ALLDAY

yeah i figured they were jdm.. too bad the plugs w/ the bulbs just don't interchange

thanks for the info

__________________
1992 BB2 Si H23a3

el_baby

you will be cutting the green/(something) from the sides and wiring that with the green/(somtheng) from the center and viceversa

the black is a common ground, so no need to cut


the only thing is that the center bulbs are 35W and the sides are 5W or something like that... that idk if you could blow a fuse

-i have made almost all my bulbs in leds.. so i wont have any problem with that... but the flashers will go faster as if there where no bulb, that may be controled with a resistor but i havnt tried

gotjnco

Ok... last weekend i did the mod... but i did it differently... cause i have the jdm side turn signals...



In order to do this mod... you need to do the following:

You would need to get the socket and bulb from a civic that has dual fillament or from the rear bulb of an accord. I believe is the 7443 bulb in there and have it both stay on AND flash.. along with the corner marker and side marker, really just a different socket and one more wire you have to splice in.

Moreover, the plug will fit PERFECTLY since it is STANLEY, and you do not have to do any modifications... the only modification is the splicing... that is all...

__________________
Estebuns
I'll eat your rice with my spoon!
Soy Guapo... Fulltime...

gotjnco

have u done this yet???

i have a video...

__________________
Estebuns
I'll eat your rice with my spoon!
Soy Guapo... Fulltime...