Blackout Trap

well i need some help with my tranny i removed it but when i came back to
install it i noticed the bolts for the tranny were most of different lengths i just
need to now if anybody knows which to use and where

__________________
Pain in your ass, Crashed from the back... Jigga i'm Blackout Trap

red92si

One cupcake tray to to hold and organize your bolts and you would have been fine.

Are you talking about the two upper mounting bolts, and the three lower mounting bolts? Or are you referring to different transmission bolts?

__________________

Tyler

Blackout Trap

well i'm think'n that the 4 bolts that and shortest of same length go to the mount but i'm talkin bout the 2 on the back of the tranny and there only three spots on the mount so idk

__________________
Pain in your ass, Crashed from the back... Jigga i'm Blackout Trap

mooncaller

I might suggest pictures.

Or... at least an image of a Helm's with bolts circled.

There are 2 short bolts at 11 and 1 o'clock on top of the trans that mount under the distributor and have little metal brackets attached to them.

There is a long one near wear the starter connects. There are two more short ones on the bottom going in from engine side (same length as the two short ones up top).

Then there is a series of shorter ones that go into the rear motor mount bracket piece that hangs down. (Three of those.)

Umm... yeah, sorry if not exactly where I say they are, I'm doing this completely from memory when I pulled my trans a little over a month ago.

__________________
'94 Prelude Si (Heavily Damaged)
'93 Prelude VTEC (Work in Progress)
TrackBuilt