obos

I took my climate control out of the dash awhile back, but when I put it back in, it does not work. All I did was remove the connectors from the bottom of the control units and some screws to move it out. I installed in the reverse fashion. But no power is going to it. Any help would be greatly appreciated since winter is here and I freeze in my car now.

Thanks much

Mark94

If you did indeed rewire everything back together properly, then the only other thing I can think of is that you maybe blew a fuse while you were removing the unit.

Mark

__________________
_____________________________________

94 Prelude VTEC - garage queen - SOLD
03.5 Titanium Grey Mazdaspeed Protege - new garage queen
07 SSM Fit Sport - daily driver

AIM: MarkSpeed94

go pre

I would say check that the connectors are pushed all the way in, but you probably already tried that. also, maybe one of the wires got pulled a little bit out of the connector when you were pulling it out of the socket, i know those plugs require a bit of force to get out. just make sure all the pins are all the way in, and check the fuse like Mark said.

__________________
92si

obos

Thanks guys. I'll double check evreything again. Its a pain though to remove the center console again and squeeze under there. The first time I had the passenger seat removed. Well thanks again. I'll be busy tonight..

Chewy