SlowSi

Hmm, I bought my new Prelude with a pos universal muffler on it with NO catback. How would I get the muffler off and put a stock one back on? Do I have to cut the aftermarket one off?

Thanks!

blahblahblah

If there are no flanges then your gonna have to cut it off and weld another one on.

SlowSi

I can't bolt the stock exhaust on stock piping?

red92si

when the universal muffler was put on, most likely they just cut off the stock one and welded the universal one on. You could unbolt the piping from the axle back, and then, if you can get a stock muffler with the piping to the flange at the axle, you can just bolt it back up.

Otherwise, you will have to get it welded. No big deal really, a muffler shop shouldn't charge you more than $10.

__________________

Tyler

VTEC Shore Lude

10 dollars??? no no no they will charge more than that for labor...plus he needs a stock muffler.

__________________
R.I.P. Gecko (August 7, 2003 odo:78,834 miles)


92 Si Parts for sale

red92si

if they are charging you more than $10 for the 5 minutes or less it takes to do one weld around an exhaust pipe, then you are getting ripped off.

The $10 does not include a stock muffler... he'll have to get that for himself.

__________________

Tyler

SlowSi

Will a 5th gen stock muffler fit a 4th gen? I need a stock muffler bad! Do you guys know anyone selling one? I can trade the universal one too.

SlowSi

Also, Si mufflers are the same as VTEC ones, right?

red92si

yes... and to answer the question above, 5th Gen mufflers should fit.

__________________

Tyler