so yea, but it boggs out when i smash it. feels like its overflows with fuel then after a second it finally goes..when it boggs, its like i hit the breaks....almost like when u dont have vtec and u go up there and the car stops you from going there...that safety thing....wats up with that?
I think he's talking about that h22 lag.. maybe?
Mine does the same thing at this point.
So far I've changed out the primary o2, and I have a TPS valve on its way, so hopefully that'll do it.
Otherwise I'll bore out the IM ports and clean them, and if that doesn't do it, i'll just pull the codes.
BAH!
I hate that, but it's part of the "learning how to work on hondas" thing, huh Ken?
I feel that a lot of the issues have to do with previous owners, and their driving habits.
The last owner of my Prelude drove it hard, but took great care of it..
It's in great shape, but I just replaced the Primary o2 and egr and they were SPENT!
I've got a TPS valve on order, and will be taking apart my IM and THrottle body assy to clean them really good too.
I also notice that the days the lag is really bad, my MPG goes WAAYYYY down. Like really badly.
Hopefully all this stuff will do the trick. And hopefully the thread starter can learn how to clearly convey his questions in english.
hey, thanks to peanut gallery for all the comments....
and for those who gave in some input...
what injectors should have been in there?
also, its whenever i smash it, but i dont take it to vtec...so limp mode will still affect it at lower rpms? no, i havent hooked up the vtec wire, i havent seen it done, but i know where it goes, so im a bit timid to do it myself.
im using a chipped p13, wanna be jun chip.
im takin you into consideration jsmoon
thanx for the input....even from the peanut gallery...again....
what injectors exactly are supposed to go in there, the jdm ones cant be there why?
i also checked my plugs, i put new ones in there and a day later the seemed like the car was runnin rich, thats pretty much wat it feels like, like its running rich.
hey, thanks to peanut gallery for all the comments....
and for those who gave in some input...
what injectors should have been in there?
also, its whenever i smash it, but i dont take it to vtec...so limp mode will still affect it at lower rpms? no, i havent hooked up the vtec wire, i havent seen it done, but i know where it goes, so im a bit timid to do it myself.
im using a chipped p13, wanna be jun chip.
im takin you into consideration jsmoon
thanx for the input....even from the peanut gallery...again....
first things first. take that chip out of your ecu. second, connect all wires. see if that works for ya.
Has this ecu been used before?
Do Like previously stated and hook up all wires.
I would start here. When I first started programming chips I used a couple incorrect files(roms) and my engine would run but it would run very poorly and similar to your description. I WOULD NOT be driving on this ecu if you havent used it with success, with all the timing and fuel adjustments you can make with these chips I would be worried to harm my motor! Just my 2 cents. Good luck
Do you have aftermarket Cams? a buddy of mine had that problem. it was like when vtec kicked in everything was quiet so we decided to adjust the cam gear timing and everything was fine.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
yeah seriously... sometimes I wonder about some of these new members... Sniffing glue FTL!
Linear Mode
