WillHoman

I just got my strut bar in, is it alright to just remove the bolts then just bolt the bar in or will something happen if i remove the bolts without clamping the springs down.

marshdoggg

you can just unbolt then rebolt, the weight of the car will keep the springs right where they are! i did the same thing, no prob
marsh

__________________
-Marshall-

ludeconduct.com northwest prelude owners group
my setup
my photography website

ZIG

you might want to be careful with that... it depends on the strut bar. my neuspeed bolts onto the upper A-arm bolts, and mine dropped out on me. no biggy, just some finesse and a pry bar should put it back in place, if you have a strut bar that just bolts to the shock bolt studs, then you're good to go

red92si

Yeah, installing my Neuspeed was a b**ch. The bolts dropped out, and then I had to like put all my weight on the bar to get it to line up with the passenger side bolts once I got the driver side on. Whatever though, I love that strut bar. Turning is no much nicer.

__________________

Tyler