bsi

are they hard to installl, i have a very basic knowledge of the brakes and a good amount of tools, do you think this is something that i would be able to do?

__________________

irishpilot

yes, definitely

Hardest part of it is just making sure that when you install that you get ALL the air out of the system when you bleed them.

Easiest way to bleed is to have two people. Fill the brake resivoir
have other person in car and slowly push brake pedal to the floor.
When they do this you will soon have fluid coming out but it will be air fluid then some air, fuid, and so on. Then fill the resivoir again and when the pedal is pushed and is all fluid titen the little
nipple bolt thing and go to next line. I think you are to start with the rear passenger then rear driver, front passenger and then finally the front driver.

good luck

G_Loc

yea, very easy to install.

you will make a bit of a mess with the brake fluid though. don't get that stuff on your paint!

__________________

MR.CLIFFORD

This would be a great write up with pics

__________________

QWITCHERBICHEN

bsi

i might just do that

__________________