Spoon Bars - Honda Prelude Forum

Blamo · 09-15-2007, 01:52 AM

Ok, can you tell me the condition of these bars? At first, I thought they were true 4th gen. But now I pretty much understand that they are 5th gen bars. But have these already been cut? If not, where do they need to be cut to fit my 4th gen? How much has got to be cut out of it? And the rear is interchangeable between 4th and 5th gen right? Thank You.

mgcshroomz · 09-15-2007, 03:03 PM

i have a 5th gen bar on my 4th gen (front) for vtec models you hafta trim a tad off the passenger mounting plate.
i'm not sure about the rear fitting, i'd be interested in finding a spoon rear bar if it will fit a 4th gen.

slipknot95758 · 09-15-2007, 05:11 PM

yes rear is a direct swap the front you need to cut off some of the pass side if you have abs

mjvoet · 09-27-2007, 05:33 AM

If you have ABS you will also have to bend one of the ABS brake lines. Which is why this bar isn't intended for a 4Gen. Spoon made a bar that fit the 4Gen w/ABS:

Shot at 2007-08-20

gotjnco · 10-26-2007, 04:44 PM

i have the 5th gen spoon sports bar.. here is the mod i made...

I didnt have to bend any lines at all.. it took me 5 mins to install...

pictures

gotjnco · 10-26-2007, 04:46 PM

Quote:

Originally Posted by mjvoet

If you have ABS you will also have to bend one of the ABS brake lines. Which is why this bar isn't intended for a 4Gen. Spoon made a bar that fit the 4Gen w/ABS:

Shot at 2007-08-20

wow that is rare to find...