soldering CC controls. - Honda Prelude Forum

cifer6425 · 01-13-2007, 12:29 AM

I have a CC that does not always change when you press the vent seleection. I have heard that all you need to do is to solder the connection on the CC. I do not know what connections to solder. Does anyone here?
I have a pic...

Thanks

sean1121 · 01-13-2007, 06:50 AM

The solder joints for the green connector need to be resoldered.

edit: never post just after you wake up.

petern101 · 01-13-2007, 09:34 AM

there's a good writeup on how to do it.

its in the faq's. but yeah its a common problem. the faq has the main missing pics but it should have been updated with current ones that i took when i did it. if not, i'll post those pics again

cifer6425 · 01-13-2007, 10:57 AM

i see the write up for the JDM cc, but this if for the USDM cc.

cifer6425 · 01-13-2007, 11:41 PM

preludestud11 · 01-14-2007, 06:50 AM

on the other side of the green plug where it sticks through the board is where you will re-solder.

jsmooney · 01-14-2007, 07:53 AM

hmmm, i soldered those before i think. is that the one thats in the middle? all my vents work fine, but when i want to go from the windshield selection or all floor selection to the top selection, it doesnt always change. in fact, it seldom does

TruNinja619 · 01-14-2007, 11:37 AM

inside the red box is what you need to resolder...

I did the same mod... and I have everything working... except for the lighting... it worked perfectly after I did the mod for a month.. then I started getting the lighting problem again... and I think its b/c I put too much solder on some of the points... enough to connect to another point.. but I don't know..

petern101 · 01-14-2007, 05:48 PM

could be the two bulbs as well.

mine are blown (lights) but everything works fine.

i actually have a spare one, just too lazy to put in the bulbs

SNsLude · 01-14-2007, 07:13 PM

http://preludeonline.com/forumdisplay.php?f=88

it's in the FAQ section on the main page. 3rd link from the top.