93BoostedH22A

Ok i converted my 93 cluster to a 96 el gauge i had the complete dash for it and i swapped out the whole dash.... no wiring done...plug and play..... the problem is when i use the turn signal left or right both light left right blinks as in
i signal left <---- (left) <---- and -----> (right) both are blinking while im signalling. They are both on when i signal left or right its like everytime i signal my emergency light is on wth????

 

prelude styl

missing ground wire.. somewhere.

__________________
-Ryu-
92 Si/Vtec - Damien - Conversion King & JDM Whore
---Sold---

-OUTUVIT-

93BoostedH22A

can you tell me which ground wire to look for????

prelude9si

i have the same exact problem with the same swap u did same years, also when i hit my hazards, the lights in the cluster dont even blink.

Aznluder

I have the same problem from my install last year and i yet still havent got the time to figure out the problem yet.

I will be toying with it this Friday, if you find out the problem before me please keep me updated mate.

__________________

93BoostedH22A

hahaha i guess im not the only one with this problems

prelude styl

lmao, wow look at all you guys.

Uh, hold on, lemme see if I can pinpoint the ground wire for you guys.. it's been quite a few years since I made that writeup.

__________________
-Ryu-
92 Si/Vtec - Damien - Conversion King & JDM Whore
---Sold---

-OUTUVIT-

mike3

Ok. same thing happened to me in spring, haha. It drove me nuts. The wire you need to ground is on the passenger side. Theres on small harness you dont plug in. I think there are like 3 or four wires going into it. It just dangles on the pass. side under the dash. I believe the wire is black. Just ground it and problem solved. I'll look for it tomorrow to be more specific but i hope that helps

Aznluder

Interesting.. A black unconnected wire.
So all prelude have that black wire dangling loose on the passenger side of the car underneat the dash?

__________________

prelude styl

No, that's only if you had the 94+ si/vtec EL harness. If you did the raw conversion that I wrote up, you don't have that connector, but the pin on the cluster that that wire connects to, is the ground I was talking about. Unfortunately I don't have my 95 helms, only my 93, so I can't look up which pin that far off ground wire went to.

__________________
-Ryu-
92 Si/Vtec - Damien - Conversion King & JDM Whore
---Sold---

-OUTUVIT-

prelude9si

this is true its the extra connector just cut the solid black wire and ground it. It fixed my problem.

93BoostedH22A

yeap problem solved!!!! thanks for the help guys appreciate it!!! damn that ground

mike3

Hey no problem!

remy525

i have a 96 (h23)si and i want to swap for the h22 cluster (did the motor swap) can i just plug in the vtec cluster no problem or is there anything extra i have to do?
remy525

Maharajamd

Good lord, this thread is 7 months old and about the EL GUAGEs not just the str8 vtec cluster! WTF LOL

SEARCH BROTHER, SEARCH

chester

+1

But yes, you can swap the vtec cluster since you already have EL gauges. Sell me your Si Gauges.

Maharajamd

i got a si auto, and a vtec cluster right here....

93BoostedH22A

grave digger!

__________________

DoHCxVTeKz

hey.. did anybody done this swap 92-93 to 94-96 dash wireharness and had problem wire up the fog light switch? because i have the fog tweeter switch but 94+ harness doesnt have the wire option for it.. can anyone plz help me out? thanks

__________________

chester

Just cut the connector off of the 92-93 harness and wire it directly to the fog relay.