|
S2P2s camshafts question!
I'm going to install my S2P2s once my valvetrains & cam gears are in; it's all stock block. So to the peeps that have the pro2s, will I have V2V problem with settings at 0,0? What about V2P? I've done tons of research on HT but I'm still confused about everything. I don't have the tool to do V2V adjustment as I already saw the DIY on HT.
Has anybody run the Pro2s at 0,0 degree? I heard ppl running them like 3-4 degrees apart, but still want to confirm every bit of info.
I also called up Brian at Skunk2, and he gave me the quick setting for the Pro2s; 0*I, +4*E. Every thread I read says at least 3-4 degrees apart from eachother.
As I did further researched, I found that by setting the cam gears at 0*I, +4*E will put me at close to or about .030"-.040" clearance; I can't remember exactly. But, like the rest said, its better to measure the V2V; since, it varies from engine to engine. I think I'll be fine with the quick setting that Brian gave me.
__________________
203whp/172wtq[/B]
|
Linear Mode
