pic request: VTEC PS pump and bracket - Honda Prelude Forum

Forbidden · 10-15-2003, 09:51 AM

Anybody with a 4th gen VTEC (or SR-V) can take a pic of the PS pump and bracket, I've always wondered how is was hooked up since the plastic wire cover is coming right over the bolt hole on the H23 PS pump bracket.

Forbidden · 10-16-2003, 05:28 AM

Nobody has a 4th gen VTEC or SR-V and a digital camera or are you guys just too lazy?

BryanS · 10-16-2003, 06:34 AM

Forbidden · 10-16-2003, 08:30 AM

Thanks a lot!

Now I'll have to compare it to mine to see if there's any other differences in the bracket other than the hole for the bolt. I hope it's only the bracket that's different...

BryanS · 10-16-2003, 08:47 AM

Let me know if you need pics from a different angle or closer and I can take more.

Zimmlude · 10-16-2003, 02:43 PM

The bracket also holds the pump over toward the driverside just a little bit more. Since the A/C-Alt. belt has one more rib on the VTEC's the P/S pump has to be a little more toward the DS as the pully on the flywheel is a little more over as well.

HTH

Forbidden · 10-16-2003, 04:26 PM

Quote:

Originally posted by Zimmlude
The bracket also holds the pump over toward the driverside just a little bit more. Since the A/C-Alt. belt has one more rib on the VTEC's the P/S pump has to be a little more toward the DS as the pully on the flywheel is a little more over as well.

HTH

Really? I have the H23 PS pump and bracket and H22 Alt. and A/C and using their original pulleys and I haven't notice anything wrong... I'll go take a look right now.

Forbidden · 10-16-2003, 04:33 PM

It was a bit dark outside but it looks like the pump should fit on either bracket...

Zimmlude · 10-16-2003, 08:44 PM

Yeah, the pump should fit on either bracket but the VTEC one will hold the pump over a little bit more. I don't think the distance is so much that it will cause problems but I am pretty sure it is there.