JamesH23

hi everyone.
i jus did a OBD1 H22a swap in my 96 OBD2 h23a1 prelude
i used my harness and i used a jumper harness to run the P13 ecu
know for the problem i got everything hooked up and it will turn over but no crank...i checked the sensor goin to the coil theres power and the coil wire will not send a spark i put a coil that i know works and nothin its external i can hear the fuel pump come on and its gettin fuel but no spark
HELP plz if u can...

tormaschy_15

yeah someone help i was driving my car yesterday and it stalled and now it does the same thing and has no spark. but hey check your coils ground thats the problem i had when i swapped mine and it didnt start