irishpilot

Lately when I'm on the freeway and I hold the little button that
activates the cruise(on the steering wheel) and let go, it will not
ingage. I will try over and over and after about 10min it will come
on finally.

Any guesses as to what could cause this?
What should I check, is the switch electric or mechanical that sets it?

Thanks

Prelude UK

Make sure the master cruise control button is on. I have made this simple mistake in the past. I really thought that the system developed a fault, when all along, the reason it wasn’t working was because the master switch wasn’t on.

Also, it is “engage�, not “ingage�.

__________________

29/05/2005 - Forever:
2000 Honda Prelude 2.2 VTi (H22A8 / BB8).

07/07/2001 - 22/01/2005:
1997 Honda Prelude 2.2 VTi (H22A5 / BB8).

28/08/1999 - 07/07/2001:
1992 Citroen ZX Volcane 2.0.

??/05/1999 - 28/09/1999:
1984 Ford Fiesta Poplar 1.0.

www.CARRisma.co.uk

ExodusFX

I dunno, but mine used to do that occasionally if I hadn't used it in a while.

__________________

VTEC Shore Lude

make sure the fuse is good

__________________
R.I.P. Gecko (August 7, 2003 odo:78,834 miles)


92 Si Parts for sale

jdm_vtec_h22

Are you getting any codes? It might be your speed sensor. It's on the back of your tranny. Check the wiring clip on it and make sure it's plugged in good.

Lucke

same thing here... first time i tried to use it in a while and it wouldn't work. after a little bit of pushing/holding it down, it worked...

irishpilot

Ya, it fixed it self all of a sudden. BUt I Make sure the cruise master switch was pushed in. I may replace the fuse just for ****s

THanks guys