j_t_heilbrun

So I've got my climate control all wired and working perfectly. There are 3 wires that aren't hooked up.

One is for the Heater valve solonoid so I know I don't have to worry about that one. The second goes to the Vehicle Speed Sensor (VSS) I'm not sure why that one is even there but figured it might be important. And the third is the AC pressure switch, which I think is neeeded, since the USDM uses a AC thermostat to activate the clutch, but its not used on the JDM CC.

So do I need to wire any of these? If so what do I wire them too. I just want to make sure my AC is gonna work.

Josh

__________________


You have the right to free speech, as long as your not dumb enough to actually try it.

Bertico78

ok, the orange VSS wire you could tap to where the VSS wire meets the gauge cluster, the only orange wire i believe.

the solenoid wire you leave alone.

the blue/yel a/c pressure switch wire connect it to the blue/yel that used to go to the USDM evaporator thermostat. and you should be done!

__________________

Learn the Secrets of Self-Made Millionaires Now

j_t_heilbrun

are they needed though?

__________________


You have the right to free speech, as long as your not dumb enough to actually try it.

prelude styl

They're there, they do something. Yes they're needed. Just hook them up, it's like 30 seconds of work.

__________________
-Ryu-
92 Si/Vtec - Damien - Conversion King & JDM Whore
---Sold---

-OUTUVIT-