info on F22B for everyone who doesn't know - Honda Prelude Forum

OSOFAST10 · 06-20-2003, 03:20 PM

ok just cause i've seen tons of crap on the site about this motor i will tell everyone about it

JDM F22B
158hp (160ps)
148 fl lbs
Pretty much the same as the H23
only it has .1L less displacemnt

people with the swap that i know of -->

osofast10 and UBetterBelieveIt

hope this helps everyone

concLude · 06-20-2003, 03:23 PM

pretty much the same?

cant say from experience but on paper the h23 looks stonger, more torque

willmbrk · 06-20-2003, 03:45 PM

Yep, H23 has 158 torque cause of the larger displacement

Red4WS · 06-20-2003, 05:04 PM

Not to bring this shlt up again but why Ubetterbeleiveit say that he runs .3 of second behind a vtec model?

G_Loc · 06-20-2003, 05:23 PM

you forgot to list at what RPMs the motor makes its peak hp and torque

OSOFAST10 · 06-21-2003, 05:58 AM

oh... i'll have to do some reasearch for that answer...

jsmooney · 06-21-2003, 08:57 AM

if jacque ran a 15.3xx and i ran a 15.6xxx, then do the math! 0.3xxx seconds!

jsmooney · 06-21-2003, 09:03 AM

everythings the same as the h23 except for the power and the torque.....

shiftgearz · 06-21-2003, 09:58 PM

Lower compression too

imagine the possibilities

jtcdudeman · 06-21-2003, 10:17 PM

GUYS, are you not leaving out the most important part of info on it? The same reason ppl buy the h22a and h22a1....

jsmooney · 06-21-2003, 11:03 PM

what do you mean by "most important part"? There may be a little secret, but if there was i would not tell - hehe! But there is nothing we haven't told you about it!

just curious but what would the peak horsepower do? like what rpm it peaks at? What would the difference be? i assume it is the same as the h23

shiftgearz · 06-22-2003, 12:12 AM

Whats the most important part? JDM....? h22a1 is usdm... One of the reasons why I bought the h22a over a turbo kit for the h23a was cuz its like renewing my car with a low mileage engine. Could that be it? Anyways heres the f22b specs, courtesy of preludecrazy.com :

DOHC
2156
157.811 @ 6000
148.276 @ 5000
9.5:1

Compare to H23A1:

DOHC
2259
160 @ 5800
156 @ 4500
9.8:1

jsmooney · 06-22-2003, 12:46 AM

problems? i smell.....jealousy.....

OSOFAST10 · 06-22-2003, 12:56 AM

he he me too... i smell it too

concLude · 06-22-2003, 01:01 AM

oh paper like i said the h23a1 looks better, but who knows, jorge your times are pretty good for the race at MIR today.

OSOFAST10 · 06-23-2003, 07:51 AM

thank brandon. i just wanted to break the 16's and i did that so i'm happy.

but for everyone else i just don't want to start a freakin f22b is better the h23 war. i think it's g@y the whole h22 vs h23 war. about who's is better and blah blah blah. i just wanted to let everyone know that the h22 isn't the only jdm motor you can put in your ride. and let everyone know what are the spec. on the f22b cause not to many poeple know about it.

OSOFAST10 · 06-23-2003, 07:57 AM

oh and one last thing. everyone got to stop raggin on UBetterBelieveIt for running a good run with his motor and runing only .3 slower then h22 ludes. people have to remember it's not the car but how you drive it. i bet a lot of us could kick the living shlt out of a viper if the guy didn't know how to drive it. and i'm not trying to start a fight or anything but i've raced cars that on paper are better then me (ie. integra GSR) and i have walked on them cause the driver sucked. by no means i'm saying i'm a good driver but people get use to there cars differently, some faster then others. but either wat just wantted to say that. to stand up for my f22b bro

jtcdudeman · 06-23-2003, 05:47 PM

guys cmon... one of you post a picture of your valve cover..

cantdrive55 · 06-23-2003, 05:51 PM

Quote:

Originally posted by jtcdudeman
guys cmon... one of you post a picture of your valve cover..

It's identical to the H23 Valve cover.

Zimmlude · 06-23-2003, 05:58 PM

Doesn't the H23 have a longer stroke than the F22? I thought that was the reason the H23 had the better torque and higher displacement. Correct me if I'm wrong.