So I decided to clean my throttle body .. I bought a can of throttle body cleaner and removed my intake hose .. and turn the throttle plate and sprayed the cleaner in and then wiped the dirt and fluid and used a toothbrush to get a further reach ... After some rigirous cleaning I replaced all the parts and started the engine. No problem but when I took the car for a spin. I realized when the car was idling the rpm jumps from 500 to 1500. It bounces. The car drives fine.
Before cleaning the throttle body the idle was at 700 consistently.
I didn't touch any vaccum lines .. only thing i did was remove the intake hose and the small hose that runs from the intake hose and to the engine ...
To the best of my knowledge I tightened everthing according .. i will double check..
I cleaned the silicon couplers could that have worn the silicon out thereby causing it not to seal probably?
When I am checking the throttle position sensor or map sensor what am I looking for ?
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
